Effects - Dave Smith Instruments Sequential PROPHET X User Manual

Other modulation ideas:
• To create the "attack pitch blip" effect in classic synth brass sounds,
dial up a good two-oscillator synth brass sound, then route Envelope 3
to 2
osc freq
Release: 0 with an amount of 18.
• Route an LFO to
controlled by the modulation amount. Panning speed is controlled by
the LFO frequency. Add a second mod path to control the LFO speed
with the Mod Wheel for a faux rotating speaker spin-up/spin-down
effect. Enable the chorus effect and set up a third mod path to control
with the mod wheel for even better results.
fx mix
• Route
velocity
you play.

Effects

You can add two digital effects to any Prophet X program. In stacked or split
sounds, each layer can have its own independent effects.
Not all sounds need effects to make them interesting, but adding a touch
of reverb or delay can add a sense depth, just as adding chorus, flanging,
or phasing can add movement.
Effects settings are saved individually with each program. If you enable
the button, time-based effects such as the delays can be synchronized
sync
to the arpeggiator, sequencer, or MIDI clock for repeats that occur on the
beat.
EFFECT 1
EFFECT 2
SELECT 1 / 2
The Effects section
58 Effects
and set Envelope 3 to Attack: 0, Decay: 30, Sustain: 0, and
to create an auto-panning effect. Panning width is
pan
to filter to subtly overdrive the filter the harder
drive
Dave Smith Instruments