Dave Smith Instruments Sequential PROPHET X User Manual page 105

5. Enable the
explanation of phase sync.)
6. Set the
pitch
7. In the
auxiliary envelope
nation to
according to its ADSR (attack, decay, sustain, release) settings.
8. Set the auxiliary
to 100, and
sustain
of the modulation.
9. Play some single notes and in the middle range of the keyboard. Clas-
sic hard-sync lead!
10. To make it a little edgier, set filter
envelope
Adding Effects to the Lead
You can enhance the sync lead by adding some delay and reverb.
To add effects:
1. In the
effects
2. Turn the
3. Set to 22, then set parameter 1 (
mix
) to 47, and parameter 3 (
back
4. In the
effects
5. Turn the
6. Set to 47, then set parameter 1 (
mix
138, and parameter 3 (
7. Play some notes. Searing hard-sync lead!
Prophet X User's Guide
button. (See "Sync 2>1" on page 24 for an
2>1
sync
of Oscillator 1 to C3. This will intensify the sync effect.
1 . This routes envelope 3 to modulate osc 1 pitch
osc freq
env amount
release
to 100, and filter
decay
section, press the
knob and select
effect type
section, press the
knob and select
effect type
predelay
section, select
envelope
to 127 and
attack
to 65. This will set the amount and "shape"
to 100, filter
drive
env amount
1 button.
effect
delay stereo
) to 135, parameter 2 (
time
) to 100.
lpf
2 button.
effect
super plate
) to 100, parameter 2 (
time
) to 12.
Creating a Hard-Sync Lead
3 and set its desti-
to 23, to 60,
decay
to 0, filter
cutoff
to 127.
.
feed
.
tone
-
) to
93