Dave Smith Instruments Sequential PROPHET X User Manual page 23

To turn on Stack mode:
• If it's not currently lit, press the
lit. The program on Layer B is stacked with the program on Layer A.
Polyphony is halved since two voices are used per note.
To turn off Stack mode:
• If it's currently lit, press the
Only the program on Layer A is heard.
To edit Layer B:
1. Press the
2. Change any parameters to change the sound of Layer B.
3. Press the
To edit Layer A and B simultaneously:
1. With Stack mode on (
button until it begins flashing, indicating that you are in "Link" mode.
b
Release the button. (It should still be flashing.)
2. Change any parameters. The parameters are changed on both Layer A
and Layer B.
3. To turn off Link mode, press the
flashing.
Saving a program saves any edits to programs on both Layer A and Layer B.
To copy Layer A to Layer B:
1. Press the
2. Press Soft Key 1 (
3. Press Soft Key 1 again to confirm. Layer A is copied to Layer B.
To copy Layer B to Layer A:
1. Press the
2. Press Soft Key 2 (
3. Press Soft Key 1 to confirm. Layer B is copied to Layer A.
Prophet X User's Guide
button. Layer B editing is enabled.
edit layer b
button again to turn off Layer B editing.
edit layer b
stack
button.
edit b layer
>
copy a
button.
edit b layer
>
copy b
button. The button becomes
stack
button. The button becomes unlit.
stack
button is lit) press and hold the
edit layer b
).
b
).
a
Chapter 1: Getting Started
edit layer
button again. It stops
11