Clock Parameters - Dave Smith Instruments Sequential PROPHET X User Manual

Clock Parameters

BPM: 30...250—
minute). The
tap tempo
enabled on the low-frequency oscillator, or
section, the BPM rate affects the LFO frequency and/or delay effect. When
syncing to an external MIDI clock source, the BPM setting has no effect.
Clock Divide—
below:
Name
Half
Quarter
8th
8 Half
8 Swing
8 Trip
16th
16 half
16 Swing
16 Trip
32nd
32 Trip
Pressing the
Tap Tempo—
LED flashes at the BPM rate you set.
Prophet X User's Guide
Sets the tempo for the arpeggiator in BPM (beats per
LED flashes at the BPM rate. When
Selects a basic note value relative to the BPM. See the table
Tempo Timing Division
BPM/2 Half note
BPM Quarter note
BPM x 2 Eighth note
BPM x 2 Eighth note, half swing timing
BPM x 2 Eighth note, full swing timing
BPM x 3 Eighth note triplets
BPM x 4 Sixteenth note
BPM x 4 Sixteenth note, half swing timing
BPM x 4 Sixteenth note, full swing timing
BPM x 6 Sixteenth note triplets
BPM x 8 Thirty-second note
BPM x 12 Thirty-second note triplets
tap tempo
is enabled in the Effects
clk sync
button 4 times sets the tempo. The
is
lfo sync
Arpeggiator 65