Calibrating The Prophet X; Calibrating The Filters; Calibrating The Pitch And Mod Wheels; Calibrating The Touch Sliders - Dave Smith Instruments Sequential PROPHET X User Manual

Calibrating the Prophet X

Because the Prophet X is calibrated at the factory, controls such as the
Pitch and Mod wheels, Touch Sliders, and analog filters shouldn't require
re-calibration. However, if you experience unexpected behavior with
these controls, you can use the built-in calibration function to tune them
occasionally.

Calibrating the Filters

To calibrate the filters:
1. Press the
2. Use the Soft Knob 1 to select
(
start cal
3. The synthesizer performs its auto-calibration procedure. Don't turn off
the power while it's doing this.
4. When finished, the front panel controls will return to normal and you
can play the Prophet X again.

Calibrating the Pitch and Mod Wheels

To calibrate the Pitch and Mod wheels:
1. Press the
2. Use the s
instructions in the display.
3. When finished, press the
You can now can play the Prophet X again.

Calibrating the Touch Sliders

To calibrate the Touch Sliders:
1. Press the
2. Use the s
instructions in the display.
3. When finished, press the
You can now can play the Prophet X again.
Prophet X User's Guide
button.
global
) .
button.
global
k 1 to select
oft nob
global
button.
global
k 1 to select
oft nob
global
, then press Soft Key 1
calibrate filters
calibrate wheels
button again to exit the
calibrate sliders
button again to exit the
Calibrating the Prophet X
, then follow the
menu.
global
, then follow the
menu.
global
117