Blending Contrasting Sounds - Dave Smith Instruments Sequential PROPHET X User Manual

7. Enable filter touch sensitivity by pressing and enabling the
button.
8. In the
amp envelope
to 95,
decay
9. Enable volume touch sensitivity by pressing and enabling the
button.
10. Play a few notes and chords and listen to the instrument's sound: a
thicker string ensemble with the vigorous attack of the sampled instru-
ment intact
11. Now set the pitch of oscillator 1 and oscillator 2 to C3 and play a few
chords. The ensemble sounds even bigger because the synth part is an
octave higher.
To add effects:
1. In the
effects
2. Turn the
3. Set to 45, then set parameter 1 (
mix
118, and parameter 3 (
4. Play some chords: a nice punchy string section.

Blending Contrasting Sounds

Now lets modify the previous sound by keeping the synth sound, but
changing the sampled instrument to something that contrasts more with
the synth part.
To change the instrument again:
1. In the Sample Playback section use the
use the
instrument
2. Play a few notes and chords and listen: it's completely different instru-
ment now.
3. In the Filter section turn
4. Play a few notes and chords: very different again.
Prophet X User's Guide
section, set the
to 0, and
sustain
section, press the
knob and select
effect type
predelay
knob to select
resonance
env amount
to 35.
release
1 button.
effect
super plate
) to 112, parameter 2 (
time
) to 21.
knob to select
type
ukelele long finger
up to 116.
Combining Samples and Synthesis
velocity
to 127, the
attack
velocity
.
tone
guitar
.
to 0,
) to
and
111