Tab 2 - Vcf Env Amount - Dave Smith Instruments Sequential PROPHET X User Manual

TAB 2 - VCF Env Amount

Amount Vel On/O Delay Env Repeat
Amt:71 Vel On/O : On Del:0 Rept: O
VCF ADSR VCF Env Amt LP Filter LPF Misc
—Sets the amount of modulation from the filter
Env Amount: -127...127
envelope to the filter's cutoff frequency. Any setting above zero means
that each time you strike a key, the filter envelope controls how the filter
opens and closes. Higher amounts more dramatically affect the cutoff
frequency. This control is bipolar. Positive settings produce standard
behavior. Negative settings invert the envelope.
—Allows key velocity to influence filter cutoff
Velocity On/Off: On, Off
frequency. If on, the harder you play, the more the filter will open and the
brighter the sound will be. If off, key velocity will not affect the filter.
This control allows for more touch-sensitive sounds.
—Sets a delay between the time the envelope is triggered
Delay: 0...127
(note on) and when the attack portion actually begins.
—When on, the Delay, Attack, and Decay segments
Env Repeat: Off, On
of the envelope repeat. Sustain still affects the level at which the Decay
segment ends, but instead of sustaining at a fixed level while a note is
gated on, Delay, Attack, and Decay loop until the note is turned off. The
Release segment begins when the note is gated off, just as it does when
Repeat is off.
Prophet X User's Guide Filter Envelope 41