Formatting A Usb Flash Drive; Importing Add-On Samples/Instruments - Dave Smith Instruments Sequential PROPHET X User Manual

Formatting a USB Flash Drive

In order to use a USB 3.0 flash drive (USB stick) to import add-on
sample libraries or install new versions of the Prophet X OS, you will
need to properly format the drive. Formatting the flash drive will erase
any previously-recorded data on the drive. Formatting time will vary
depending on the size of the USB flash drive. Larger drives take longer.
To format a USB flash drive:
1. Insert the USB 3.0 flash drive into the
panel of the Prophet X.
2. Press the
3. Use s
oft
4. Press Soft Key 1 (
Flash drive, this may take anywhere from a few seconds to several
minutes.
5. When the USB drive is formatted, you can use it with the Prophet X.

Importing Add-On Samples/Instruments

You can add an additional 50 GB of samples by purchasing add-on
sample/instruments or importing your own. (User-created samples will
be supported in a future software release.) You'll need to download
and copy them to a properly formatted USB 3.0 flash drive (USB stick)
then connect the flash drive to the
Prophet X.
Add-on programs will load to Banks A 1-4. Samples/instruments will
load to the
user
Sample Playback menu.
To see samples and instruments added to the
button and turn the
Prophet X User's Guide
button.
global
k 1 to select
nob
format now
group, which you can access using the display in the
knob in the Sample Playback section.
type
sample import
usb
format drive
). Depending on the size of the USB
sample import
user
Formatting a USB Flash Drive
port on the rear
.
port on the rear of the
group, press the
group
121