Keypad Settings - Vacon NX_ 0003 5 User Manual

Nx series; nxs series; nxp series;
Table of Contents

Advertisement

CONTROL KEYPAD
Multimonitoring items (P6.5.4)
Vacon alpha-numeric keypad features a display where you can monitor even three actual values at the
same time (see chapter 7.3.1 and chapter Monitoring values in the manual of the application you are
using). On page P6.5.4 of the System Menu you can define if it is possible for the operator to replace the
values monitored with other values. See below.
READY
I/O term
Multimon. items
ChangeEnable
Figure 7-17. Enabling the change of multimonitoring items
7.3.6.6

Keypad settings

In the Keypad settings submenu under the System menu you can further customise your AC drive operator
interface.
Locate the Keypad settings submenu (S6.6). Under the submenu, there are four pages (P#) associated
with the keypad operation:
Keypad settings
Figure 7-18. Keypad settings submenu
Default page (P6.6.1)
Here you can set the location (page) to which the display automatically moves as the Timeout time (see
below) has expired or as the power is switched on to the keypad.
If the Default Page value is 0 the function is not activated, i.e. the last displayed page remains on the
keypad display. Press the Menu button right once to enter the edit mode. Change the number of the Main
menu with the Browser buttons . Pressing the Menu button right once again makes you able to edit the
number of the submenu/page. If the page you want to move to by default is at the third level repeat the
procedure. Confirm the new default page value with the Enter button . You can return to the previous step
anytime by pushing the Menu button left .
READY
I/Oterm
Default page
0.
Figure 7-19. Default page function
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
I/Oterm
Multimon. items
ChangeEnable
READY
I/Oterm
P1 P5
READY
I/Oter m
Default page
0.
READY
enter
READY
I/Oterm
Default page
0.
READY
I/Oterm
Default page
1.
vacon • 99
READY
I/O term
Multimon. items
ChangeDisable
enter
CONFIRM CHANGE
REPEAT TO SET
DEFAULT SUBMENU/PAGE
CANCEL
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents