Vacon Nx_6 - Mains Voltage 525-690 V - Vacon NX_ 0003 5 User Manual

20 • vacon
4.2.2 Vacon NX_6 – Mains voltage 525—690 V
High overload = Max current IS, 2 sec/20 sec, 150% overloadability, 1 min/10 min
Low overload =
All sizes are available as IP21/NEMA1 Sizes FR4 to FR10 are additionally available as IP54/NEMA12.
FR12 is available only as NXP.
Mains voltage 525-690 V, 50/60 Hz, 3~
AC drive
type
Low
Rated 10%
continuous overload
current I current
L
(A) (A)
NX_ 0004 6 4.5 5.0
NX_ 0005 6 5.5 6.1
NX_ 0007 6 7.5 8.3
NX_ 0010 6 10 11.0
NX_ 0013 6 13.5 14.9
NX_ 0018 6 18 19.8
NX_ 0022 6 22 24.2
NX_ 0027 6 27 29.7
NX_ 0034 6 34 37
NX_ 0041 6 41 45
NX_ 0052 6 52 57
NX_ 0062 6 62 68
NX_ 0080 6 80 88
NX_ 0100 6 100 110
NX_ 0125 6 125 138
NX_ 0144 6 144 158
NX_ 0170 6 170 187
NX_ 0208 6 208 229
NX_ 0261 6 261 287
NX_ 0325 6 325 358
NX_ 0385 6 385 424
NX_ 0416 6 416 458
NX_ 0460 6 460 506
NX_ 0502 6 502 552
NX_ 0590 6 590 649
NXP 0650 6 650 715
NXP 0750 6 750 825
NXP 0820 6 820 902
Table 4-2. Power ratings and dimensions of Vacon NX_, supply voltage 525—690V.
Note: The rated currents in given ambient temperatures are achieved only when the switching frequency is equal to
or less than the factory default.
Note: The rated currents for FR10 to FR12 are valid at an ambient temperature of 104 F (except for 0416 6, 0590 6
and 0820 6: rated currents valid at an ambient temperature of 95 °F).
4
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Following continuous operation at rated output current, 150 % rated output current (IH)
for 1 min, followed by a period of load current less than rated current, and of such
duration that the r.m.s output current, over the duty cycle, does not exceed rated
output current (IH)
Max current IS, 2 sec/20 sec, 110% overloadability, 1 min/10 min
Following continuous operation at rated output current, 110% rated output current (IL)
for 1 min, followed by a period of load current less than rated current, and of such
duration that the r.m.s output current, over the duty cycle, does not exceed rated
output current (IL)
Loadability
High
Rated 50% Max
continuous overload current
current I current I
H S
(A) (A)
3.2 4.8 6.4
4.5 6.8 9.0
5.5 8.3 11.0
7.5 11.3 15.0
10 15.0 20.0
13.5 20.3 27
18 27.0 36
22 33.0 44
27 41 54
34 51 68
41 62 82
52 78 104
62 93 124
80 120 160
100 150 200
125 188 213
144 216 245
170 255 289
208 312 375
261 392 470
325 488 585
325 488 585
385 578 693
460 690 828
502 753 904
590 885 1062
650 975 1170
650 975 1170
Motor shaft power
690V supply 575V supply
10% 50% 10%
overload overload overload
104 °F 122 °F 104 °F
P(HP) P(HP) P(hp)
4 3 3.0
5.4 4 3.0
7.4 5.4 5.0
10 7.4 7.5
13 10 11
20 13 15
25 20 20
29.4 25 25
40 29.4 30
50 40 40
60 50 50
74 60 60
101 74 75
121 101 100
147 121 125
177 147 150
214 177 150
268 214 200
335 268 250
422 335 300
476 422 400
536 422 450
603 476 450
670 603 500
751 670 600
845 751 650
952 845 800
1072 845 800
TECHNICAL DATA
Dimensions and
weight
50% Frame
WxHxD/kg
overload
(in/lb)
122 °F
P(hp)
2.0 FR6 7.7x20.4x9.3/40.8
3.0 FR6 7.7x20.4x9.3/40.8
3.0 FR6 7.7x20.4x9.3/40.8
5.0 FR6 7.7x20.4x9.3/40.8
7.5 FR6 7.7x20.4x9.3/40.8
11 FR6 7.7x20.4x9.3/40.8
15 FR6 7.7x20.4x9.3/40.8
20 FR6 7.7x20.4x9.3/40.8
25 FR6 7.7x20.4x9.3/40.8
30 FR7 9.3x23.3x10.1/77.2
40 FR7 9.3x23.3x10.1/77.2
50 FR8 11.5x29.8x13.5/128
60 FR8 11.5x29.8x13.5/128
75 FR8 11.5x29.8x13.5/128
100 FR9 18.9x45.3x14.3/322
125 FR9 18.9x45.3x14.3/322
150 FR9 18.9x45.3x14.3/322
150 FR9 18.9x45.3x14.3/322
200 FR10 23.4x79.4x23.7/749.6
250 FR10 23.4x79.4x23.7/749.6
300 FR10 23.4x79.4x23.7/749.6
300 FR10 23.4x79.4x23.7/749.6
400 FR11 31.3x79.4x23.7/882
450 FR11 31.3x79.4x23.7/882
500 FR11 31.3x79.4x23.7/1036
600 FR12 47.6x79.4x23.7/1323
650 FR12 47.6x79.4x23.7/1323
650 FR12 47.6x79.4x23.7/1323