Navigation On The Control Keypad - Vacon NX_ 0003 5 User Manual

76 • vacon CONTROL KEYPAD
7.3

Navigation on the control keypad

The data on the control keypad are arranged in menus and submenus. The menus are used for example for
the display and editing of measurement and control signals, parameter settings (chapter 7.3.2), reference
values and fault displays (chapter 7.3.4). Through the menus, you can also adjust the contrast of the display
(page 100).
RUN READY
Location
Local
Monitor
Description
Number of items
V1 V14
available; Item value
The first menu level consists of menus M1 to M7 and is called the Main menu . The user can navigate in the
main menu using the Browser buttons up and down. The desired submenu can be entered from the main
menu using the Menu buttons . When there still are pages to enter under the currently displayed menu or
page, you can see an arrow ( ) in the lower right corner of the display and by pressing the Menu button
right , you can reach the next menu level.
The control keypad navigation chart is shown on the next page. Please note that the menu M1 is located in
the lower left corner. From there you will be able to navigate your way up to the desired menu using the
menu and browser buttons.
More detailed descriptions of the menus you will find later in this Chapter.
7
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com