Security - Vacon NX_ 0003 5 User Manual

CONTROL KEYPAD
READY
ParamComparison
C1 C3
Figure 7-13. Parameter comparison
7.3.6.5

Security

NOTE: The Security submenu is protected with a password. Store the password in a safe place!
Password (S6.5.1)
The application selection can be protected against unauthorised changes with the Password function
(S6.5.1).
By default, the password function is not in use. If you want to activate the function, enter the edit mode by
pushing the Menu button right . A blinking zero appears in the display and now you can set a password with
the Browser buttons . The password can be any number between 1 and 65535.
Note that you can also set the password by digits. In the edit mode, push the Menu button right once again
and another zero appears on the display. Now set first the units. Then push the Menu button left and you
can set the tens etc. Finally, confirm the password setting with the Enter button . After this, you have to wait
until the Timeout time (P6.6.3) (see page 100) has expired before the password function is activated.
If you now try to change applications or the password itself you will be prompted for the current password.
The password will be entered with the Browser buttons .
Deactivate the password function by entering the value 0.
READY
I/Oterm
Password
Not in use
Figure 7-14. Password setting
Note! Store the password in a secure location! No changes can be made unless a valid password is
entered!
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
READY
Set1
0
OR
READY
Set1
P1 P6
READY
P2.1.2= 50.0
20.0 Hz
READY
I/Oterm
Password
0
P2.1.2= 50.0
20.0 Hz
EDIT VALUE
CONFIRM CHANGE
enter
I/Oterm
enter
Password
OR:
00
vacon • 97
READY
READY
enter
7