Keypad Push-Buttons; Button Descriptions - Vacon NX_ 0003 5 User Manual

CONTROL KEYPAD
7.2

Keypad push-buttons

The Vacon alphanumeric control keypad features 9 push-buttons that are used for the control of the AC
drive (and motor), parameter setting and value monitoring.
7.2.1

Button descriptions

=
reset
=
select
=
enter
=
+
=
-
=
=
=
start
=
stop
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Figure 7-2. Keypad push-buttons
This button is used to reset active faults (see Chapter 7.3.4).
This button is used to switch between two latest displays. May be useful when you
want to see how the changed new value influences some other value.
The Enter button serves for:
1) confirmation of selections
2) fault history reset (2...3 seconds)
Browser button up
Browse the main menu and the pages of different submenus.
Edit values.
Browser button down
Browse the main menu and the pages of different submenus.
Edit values.
Menu button left
Move backward in menu.
Move cursor left (in parameter menu).
Exit edit mode.
Hold down for 3 seconds to return to main menu.
Menu button right
Move forward in menu.
Move cursor right (in parameter menu).
Enter edit mode.
Start button.
Pressing this button starts the motor if the keypad is the active control place. See
Chapter 7.3.3.
Stop button.
Pressing this button stops the motor (unless disabled by parameter R3.4/R3.6).
See Chapter 7.3.3.
vacon • 75
7