Planmeca Intra User Manual page 38

BITE-WING EXPOSURE
Positioning the cone
Scale for the cone angle
34 Planmeca Intra X-ray Unit
The angle of the cone is indicated on the scale located on
the vertical joint of the tube head.
The optional long cone can be attached into the short
cone. Refer to chapter 5.2 "Selecting the cone" on page 8.
Select the cone angle from the table below.
TEETH
Bite-wing exposure
Position the cone according to the figure below.
Bite-wing
ANGLE OF
INCLINATION
5°
User's Manual