Siemens SINAUT MD741-1 System Manual page 75

Dead peer detection is switched on. Independently of the transmission of user
data, the SINAUT MD741-1 detects if the connection is lost, in which case it waits
for the connection to be re-established by the remote stations.
No
Dead peer detection is switched off.
DPD - delay (seconds)
Time period in seconds after which DPD requests will be sent. These requests test
whether the remote station is still available.
DPD - timeout (seconds)
Time period in seconds after which the connection to the remote station will be
declared dead if no response has been made to the DPD requests.
DPD - maximum failures
Number of failed attempts permitted before the IPsec connection is considered to
be interrupted.
Factory setting
The factory settings for the SINAUT MD741-1 are as follows:
Name
Enabled
Authentication method
Remote ID
Local ID
Remote certificate
ISAKMP-SA encryption
IPsec-SA encryption
ISAKMP-SA hash
IPsec-SA hash
ISAKMP-SA mode
ISAKMP-SA lifetime (seconds)
SINAUT MD741-1
C79000- G8976-C212
VPN connection
Any
No (switched off)
CA certificate
NONE
NONE
-
3DES-168
3DES-168
MD5
MD5
Main
86400
75