Hostname Via Dyndns - Siemens SINAUT MD741-1 System Manual

Allowable number of failures
Specifies how many times it is allowed for all ping packets of an interval not to
receive an answer, i.e. for none of four pinged remote stations to answer, before
the specified action is carried out.
Activity on faulty connection
Renew Connection
The SINAUT MD741-1 re-establishes the connection to EGPRS or GPRS if the
ping packets sent were not answered.
Reboot MD741
The SINAUT MD741-1 carries out a reboot if the ping packets sent were not
answered.
Factory setting
The factory settings for the SINAUT MD741-1 are as follows:
Enable connection check
Hostname
Connection check interval
Allowable number of failures
Activity on faulty connection
5.3

Hostname via DynDNS

Dynamic domain name servers (DynDNS) make it possible for applications to be
accessible on the Internet under a hostname (e.g. myHost.org), even if these
applications do not have a fixed IP address and the hostname is not registered. If
you log the SINAUT MD741-1 on to a DynDNS service, you also can reach the
SINAUT MD741-1 from external network under a hostname, e.g.
mySINAUT.dyndns.org.
For more information on DynDNS see the Glossary.
SINAUT MD741-1
C79000- G8976-C212
External interface
No (switched off)
-
5 (minutes)
3 (failed attempts)
Renew Connection
53