Vpn Ipsec Standard Mode - Siemens SINAUT MD741-1 System Manual

VPN connection
IPsec-SA lifetime (seconds)
NAT-T
Enable dead peer detection
DPD - delay (seconds)
DPD – timeout (seconds)
DPD – maximum failures
7.2

VPN IPsec Standard Mode

The VPN connections already created are shown. You can enable (Enabled = Yes)
or disable (Enabled = No) each individual connection. You can use New to add
additional VPN connections, Edit Settings and Advanced Settings to set them up,
and Delete to remove a connection.
Figure 7-6
76
IPsec VPN > Connections
86400
On
Yes
150
60
5
C79000- G8976-C212
SINAUT MD741-1