Remote Logging - Siemens SINAUT MD741-1 System Manual

Example: 26201 (262 = country code / 01 = network operator code)
Column F:
Coded operating status (for Hotline)
Column G:
Category of the log report (for Hotline)
Column H:
Internal source of the log report (for Hotline)
Column I:
Internal report number (for Hotline)
Column J:
Log report in plain text
Columns K-P:
Additional information on the plain text report, such as:
Cell ID (identification number of the active GSM cell)
●
Software version
●
TXS, RXS (IP packets transmitted in the current connection)
●
TX, RX (IP packets transmitted since the last factory settings reboot)
●
9.3

Remote logging

The SINAUT MD741-1 can transfer the system log once per day via FTP (= File
Transfer Protocol) to an FTP server.
The current system log and the system log files in the archive are transferred. After
successful transfer the transferred logs are deleted in the SINAUT MD741-1.
If the transfer fails, the SINAUT MD741-1 tries once again to transfer the data after
24 hours.
SINAUT MD741-1
C79000- G8976-C212
Status, log and diagnosis
105