Siemens SINAUT MD741-1 System Manual page 27

Figure 3-3
The factory setting is:
User name:
Password:
Note
You should change the password in any event. The factory setting is general
knowledge and does not provide sufficient protection. Chapter 3.7 contains a
description of how to change the password.
The start page is displayed
After the user name and password are entered, the start page of the SINAUT
MD741-1 appears in the Web browser with an overview of the operating state, see
Chapter 3.3.
The start page is not displayed
If after several tries the browser still reports that the page cannot be displayed, try
the following:
Check the hardware connection. On a Windows computer, go to the DOS
●
prompt (Menu Start, Programs, Accessories, Command Prompt) and enter the
following command:
ping 192.168.1.1
SINAUT MD741-1
C79000- G8976-C212
Enter user name and password
admin
sinaut
Configuration
27