Siemens SINAUT MD741-1 System Manual page 96

Remote access
Figure 8-3
Enable CSD dial-in
Yes
Access to the Web user interface of the SINAUT MD741-1 from a dial-in data
connection is allowed.
No
Access via dial-in data connection is not allowed.
PPP username / password
Select a username and a password that must be used by a PPP client (e.g. a
Windows dial-up connection) to log on to the SINAUT MD741-1. The same
username and the same password must be entered in the PPP client.
Approved Call Numbers
Specify the call number of the telephone connection from which the dial-in data
connection is established. The telephone connection must support Calling Line
Identification Presentation (CLIP), and this function must be activated.
The call number entered in the SINAUT MD741-1 must be exactly the same as the
call number reported, any may also have to include the country code and prefix,
e.g. +494012345678.
If multiple call numbers of a private branch exchange are to have access
authorisation, you can use the "*" symbol as a wildcard, e.g. +49401234*. Then all
call numbers that begin with +49401234 will be accepted.
96
Access > CSD Dial-In
SINAUT MD741-1
C79000- G8976-C212