Restoring The Back-Up; Resetting To The Factory Settings; Reboot - Siemens gigaset SE551 Owner's Manual

Restoring the back-up

ì
For Task, select the option Restore configuration.
ì
In your file system, select the backup file with which you wish to restore the config-
uration.
A window will appear prompting you to confirm the procedure.
ì
Click on OK. The configuration will now be updated.

Resetting to the factory settings

You can reset the Gigaset SE551 WLAN dsl/cable to the factory settings. You should do
this before making the device available to others or exchanging it through the dealer.
Otherwise unauthorised persons may use your Internet access data at your expense.
ì
Select the option Reset configuration to factory default settings and click on OK.
A window will appear prompting you to confirm the procedure.
.
Please remember:
You can restart your Gigaset SE551 WLAN dsl/cable if it is not working properly. It
should then be ready for use again (see page 17).
Please bear in mind that when the device is fully reset all configuration settings will
return to the factory settings. This means that you will have to completely reconfigure
the Gigaset SE551 WLAN dsl/cable.

Reboot

You can restart your Gigaset SE551 WLAN dsl/cable if it is not working properly. It should
then be ready for use again.
In the Administration menu, select Reboot.
Click on OK to restart the device.
Administration and status information
123