Setting Hdd Property To Read-Only - OVS LTN8608-P8 Quick Start Manual

User Manual

5.9.2 Setting HDD Property to Read-only

Steps:
1. Enter HDD setting interface.
Menu> HDD
2. Click
To edit HDD property, you need to set the storage mode of the HDD to Group. See Chapter Managing HDD Group.
3. Set the HDD property to Read-only.
4. Click OK to save settings and back to the upper level menu.
 You cannot save any files in a Read-only HDD. If you want to save files in the HDD, change the property
 If there is only one HDD and is set to Read-only, the NVR can't record any files. Only live view mode is
 If you set the HDD to Read-only when the NVR is saving files in it, then the file will be saved in next R/W
User Manual of Network Video Recorder
to edit the HDD you want to protect.
Figure 5. 35 HDD General- Editing
to R/W.
available.
HDD. If there is only one HDD, the recording will be stopped.
Figure 5. 34 HDD General
80