User Manual
Button
The playing speed of 256X is supported.
6.1.3 Playing Back by Event Search
Purpose:
Play back record files on one or several channels searched out by event type (e.g., alarm input, motion detection
and VCA).
Steps:
1. Enter the Playback interface.
Menu>Playback
2. Select the Event in the drop-down list on the top-left side.
3. Select Alarm Input, Motion or VCA as the event type.
Here we take playback by VCA as the example.
4. Select the minor type of VCA from the drop-down list.
Capture.
5. Select the camera (s) for searching, and set the Start time and End time.
6. Click Search button to get the search result information. You may refer to the right-side bar for the result.
User Manual of Network Video Recorder
Operation
Button
Video type
bar
Figure 6. 6 Motion Search Interface
For configuring the VCA recording, please refer to Chapter 5.4 Configuring VCA Event Recording and
Operation
Button
Playback type /
picture
85
Operation
Button
Operation
Full screen
Exit