Table of Contents
Advertisement
User Manual
3. Check the checkbox of Enable High-speed Download. And click the OK button in the pop-up message box
to confirm the settings.
4. Click Apply button to save and exit the interface.
11.2.11 Configuring Virtual Host
Purpose:
You can directly get access to the IP camera management interface after enabling this function.
The Virtual host function can be only configured through the web browser.
Steps:
1. Enter the Advanced settings interface, as shown in the Figure 11. 32.
Configuration > Remote Configuration > Network Settings > Advanced
2. Check the checkbox of the Enable Virtual Host.
3. Click the Save button to save the setting.
4. Enter the IP camera management interface of NVR. The Connect column appears on the right-most side of
the camera list, as shown in the Figure 11. 33.
Configuration > Remote Configuration > Camera Management > IP Camera
User Manual of Network Video Recorder
Figure 11. 30 High-speed Download Settings Menu
Figure 11. 31 Message Box of High-speed Download
Figure 11. 32 Advanced Settings Interface
145
Advertisement
Chapters
Table of Contents
