OVS LTN8608-P8 Quick Start Manual page 141

User Manual
2. Set up the handling action of the selected alarm input.
Check the Enable checkbox and click Settings button to set up its alarm response actions.
3. Select Trigger Channel tab and select one or more channels which will start to record/capture or become
full-screen monitoring when an external alarm is input, and click Apply to save the settings.
4. Select Arming Schedule tab to set the arming schedule of handling actions.
Choose one day of a week and Max. eight time periods can be set within each day, and click Apply to save
the settings.
Repeat the above steps to set up arming schedule of other days of a week. You can also use Copy button
to copy an arming schedule to other days.
5. Select Linkage Action tab to set up alarm response actions of the alarm input (please refer to Chapter
Setting Alarm Response Actions).
6. If necessary, select PTZ Linking tab and set PTZ linkage of the alarm input.
Set PTZ linking parameters and click OK to complete the settings of the alarm input.
One alarm input can trigger presets, patrol or pattern of more than one channel. But presets, patrols and
User Manual of Network Video Recorder
Figure 8. 4 Alarm Status Interface of System Configuration
Figure 8. 5 Alarm Input Setup Interface
Figure 8. 6 Set Arming Schedule of Alarm Input
Time periods shall not be repeated or overlapped.
Please check whether the PTZ or speed dome supports PTZ linkage.
112