Configuring Hdd Group For Recording And Capture - OVS LTN8608-P8 Quick Start Manual

User Manual
Menu> Record> Parameters
1)
2)
3)
4)
5)
Repeat the above steps for configuring other channels.
5.8 Configuring HDD Group for Recording and
Capture
Purpose:
You can group the HDDs and save the record files and captured pictures in certain HDD group.
Steps:
1. Enter HDD setting interface.
Menu>HDD
2. Select Advanced on the left side menu.
Check whether the storage mode of the HDD is Group. If not, set it to Group. For detailed information,
User Manual of Network Video Recorder
Select Record tab.
Click More Settings to enter the following interface.
Figure 5. 26 Record Parameters
Select Camera you want to configure in the drop-down list.
Check the checkbox of Redundant Record/Capture.
Click OK to save settings and back to the upper level menu.
Figure 5. 27 HDD General
Figure 5. 28 Storage Mode
76