Upgrading By Ftp; Restoring Default Settings - OVS LTN8608-P8 Quick Start Manual

User Manual
4. Select the update file from the backup device.
5. Click the Upgrade button to start upgrading.
6. After the upgrading is complete, reboot the NVR to activate the new firmware.

14.5.2 Upgrading by FTP

Before you start:
Ensure the network connection of the PC (running FTP server) and the device is valid and correct. Run the FTP
server on the PC and copy the firmware into the corresponding directory of your PC.
Steps:
1. Enter the Upgrade interface.
Menu >Maintenance>Upgrade
2. Click the FTP tab to enter the local upgrade interface, as shown in Figure 14. 8.
3. Enter the FTP Server Address in the text field.
4. Click the Upgrade button to start upgrading.
5. After the upgrading is complete, reboot the NVR to activate the new firmware.

14.6 Restoring Default Settings

Steps:
1. Enter the Default interface.
Menu > Maintenance > Default
User Manual of Network Video Recorder
Figure 14. 7 Local Upgrade Interface
Figure 14. 8 FTP Upgrade Interface
175