OVS LTN8608-P8 Quick Start Manual page 171

User Manual
which your device is connected. When the network working mode of the device is set as multi-address, the
Default Route of the device should be in the same network segment as that of the LAN IP address of the router.
Steps:
1. Enter the Network Settings interface.
Menu > Configuration > Network
2. Select the NAT tab to enter the port mapping interface.
3. Check
4. Select the Mapping Type as Manual or Auto in the drop-down list.
OPTION 1: Auto
If you select Auto, the Port Mapping items are read-only, and the external ports are set by the router
automatically.
Steps:
1)
2)
3)
OPTION 2: Manual
If you select Manual as the mapping type, you can edit the external port on your demand by clicking
activate the External Port Settings dialog box.
Steps:
1)
2)
User Manual of Network Video Recorder
Figure 11. 24 UPnP™ Settings Interface
checkbox to enable UPnP™.
Select Auto in the drop-down list of Mapping Type.
Click Apply button to save the settings.
You can click Refresh button to get the latest status of the port mapping.
Figure 11. 25 UPnP™ Settings Finished-Auto
Select Manual in the drop-down list of Mapping Type.
Click to activate the External Port Settings dialog box. Configure the external port No. for server
port, http port, RTSP port and https port respectively.
 You can use the default port No., or change it according to actual requirements.
 External Port indicates the port No. for port mapping in the router.
142
to