OVS LTN8608-P8 Quick Start Manual page 189

User Manual
1. Enter the HDD Advanced Setting interface:
Menu > HDD > Advanced
2. Click the Disk Clone tab to enter the disk clone configuring interface.
3. Make sure the usage of the eSATA disk is set as Export.
If not, click the Set button to set it. Choose Export and click the OK button.
The capacity of destination disk must be the same as that of the clone source disk.
4. Check the checkbox of the HDD to be cloned in the Clone Source list.
5. Click the Clone button and a message box pops up.
6. Click the Yes button to continue.
You can check the clone progress in the HDD status.
User Manual of Network Video Recorder
Figure 12. 21 Disk Clone Configuration Interface
Figure 12. 22 Setting eSATA Usage
Figure 12. 23 Message Box for Disk Clone
Figure 12. 24 Check Disk Clone Progress
160