User Manual
1. Enter the Camera Management interface.
Menu> Camera> Camera
The cameras connecting to the PoE interface cannot be deleted in this menu.
2. Click the
•
•
User Manual of Network Video Recorder
Figure 2. 28 List of Connected Cameras
button, and select the Adding Method in the drop-down list.
Plug-and-Play: It means that the camera is connected to the PoE interface, so in this case, the
parameters of the camera can't be edited. The IP address of the camera can only be edited in the
Network Configuration interface, see Chapter 11.1 Configuring General Settings for detailed
information.
Figure 2. 29 Edit IP Camera Interface - Plug-and-Play
Manual: You can disable the PoE interface by selecting the manual while the current channel can be
used as a normal channel and the parameters can also be edited.
Input the IP address, the user name and password of administrator manually, and click OK to add the IP
camera.
41