Playing Back By Smart Playback - OVS LTN8608-P8 Quick Start Manual

User Manual
Pre-play and post-play can be configured.
You can click
buttons on the toolbar.

6.1.5 Playing back by Smart Playback

Purpose:
The smart playback function provides an easy way to get through the less effective information. When you select
the smart playback mode, the system will analyze the video containing the motion or VCA information, mark it
with green color and play it in the normal speed while the video without motion will be played in the 16-time
speed. The smart playback rules and areas are configurable.
Before you start:
To get the smart search result, the corresponding event type must be enabled and configured on the IP camera.
Here we take the intrusion detection as an example.
1. Log in the IP camera by the web browser, and enable the intrusion detection by checking the checkbox of it.
You may enter the motion detection configuration interface by Configuration> Advanced Configuration>
Events> Intrusion Detection.
2. Configure the required parameters of intrusion detection, including area, arming schedule and linkage
methods. Refer to the user manual of smart IP camera for detailed instructions.
Steps:
1. Enter Playback interface.
User Manual of Network Video Recorder
Figure 6. 10 Interface of Playback by Tag
or button to select the previous or next tag. Please refer to Table 6.1 for the description of
Figure 6. 11 Setting Intrusion Detection on IP Camera
88