OVS LTN8608-P8 Quick Start Manual page 9

User Manual
No.
1
2
3
4
Network Video Recorder Quick Start Guide
Figure 1. 2 Front Panel of LTN89XX series
Table 1. 2 Description of Interfaces
Name
POWER
READY
Status
STATUS
Indicators
ALARM
HDD
Tx/Rx
DVD-R/W
DIRECTION
Control
Buttons
ENTER
SHIFT
Composite
Keys
1/MENU
2/ABC/F1
Function Description
Turns green when NVR is powered up.
The LED is green when the device is running normally.
The light is green when the IR remote control is enabled;
The light is red when the function of the composite keys (SHIFT)
are used;
The light is out when none of the above condition is met.
The light is red when there is an alarm occurring.
Blinks red when HDD is reading/writing.
Blinks green when network connection is functioning normally.
Slot for DVD-R/W.
In menu mode, the direction buttons are used to navigate
between different fields and items and select setting parameters.
In playback mode, the Up and Down buttons are used to speed
up and slow down record playing, and the Left and Right buttons
are used to move the recording 30s forwards or backwards.
In the image setting interface, the up and down button can adjust
the level bar of the image parameters.
In live view mode, these buttons can be used to switch channels.
The Enter button is used to confirm selection in menu mode; or
used to check checkbox fields and ON/OFF switch.
In playback mode, it can be used to play or pause the video.
In single-frame play mode, pressing the Enter button will play the
video by a single frame.
In auto sequence view mode, the buttons can be used to pause
or resume auto sequence.
Switch between the numeric or letter input and functions of the
composite keys. (Input letter or numbers when the light is out;
Realize functions when the light is red.)
Enter numeral "1";
Access the main menu interface.
Enter numeral "2";
8