Operations In Live View Mode; Front Panel Operation On Live View; Using The Mouse In Live View - OVS LTN8608-P8 Quick Start Manual

User Manual

3.2 Operations in Live View Mode

In live view mode, there are many functions provided. The functions are listed below.
•
Single Screen: showing only one screen on the monitor.
•
Multi-screen: showing multiple screens on the monitor simultaneously.
•
Auto-switch: the screen is auto switched to the next one. And you must set the dwell time for each screen on
the configuration menu before enabling the auto-switch.
Menu>Configuration>Live View>Dwell Time.
•
Start Recording: continuous record and motion detection record are supported.
•
Output Mode: select the output mode to Standard, Bright, Gentle or Vivid.
•
Add IP Camera: the shortcut to the IP camera management interface.
•
Playback: playback the recorded videos for current day.
•
Aux Monitor: the NVR checks the connection of the output interfaces to define the main and auxiliary output
interfaces. When the aux output is enabled, the main output cannot perform any operation, and you can do
some basic operation on the live view mode for the Aux output.

3.2.1 Front Panel Operation on Live View

Functions
Common Menu
Menu
Show single screen
Show multi-screen
Manually switch screens
Auto-switch
Playback
Switch between main
and aux output

3.2.2 Using the Mouse in Live View

Name
Common Menu
Menu
Single Screen
User Manual of Network Video Recorder
Table 3. 2 Front Panel Operation in Live View
Front Panel Operation
Quick access to the sub-menus which you frequently visit. Up to 5 sub-menu
options are supported.
Enter the main menu of the system by right clicking the mouse.
Press the corresponding Alphanumeric button. E.g. Press 2 to display only the
screen for channel 2.
Press the PREV/FOCUS- button.
Next screen: right/down direction button.
Previous screen: left/up direction button.
Press Enter button.
Press Play button.
Press Main/Aux button.
Table 3. 3 Mouse Operation in Live View
Description
Quick access to the sub-menus which you frequently visit.
Enter the main menu of the system by right clicking the mouse.
Switch to the single full screen by choosing channel number from the dropdown
45