Table of Contents
Advertisement
FIGURE 3
STEP 3
:
• LOOSELY assemble the CROSS BRACE (3) to the SEAT FRAME (7) and the TOWER (1) using eight RH CAPS (48), four 3/8 X
2-3/4" BOLTS (20), eight 3/8" SAE WASHERS (27), eight 3/8" RH WASHERS (28) and four 3/8" LOW HEIGHT LOCK NUTS
(25) as shown in FIGURE 3.
• Securely tighten all loose frame connections made to this point, then proceed to snap RH
CAPS (48) over the RH WASHERS (28) on all tightened connections.
STEP 4:
• SECURELY assemble the SEAT PAD (44) to the SEAT FRAME (7) using two RH CAPS (48), two 3/8 X 1" BOLTS (18) and two
3/8" RH WASHERS (28) as shown in FIGURE 4.
20 3/8 X 2-3/4"
7
44
6
1
3
48
27
20 3/8 X 2-3/4"
7
28
18 3/8 X 1"
48
25
28
FIGURE 4
Advertisement
Table of Contents
