Table of Contents
Advertisement
STEP 10:
• Slide two PILLOW BLOCKS (33) over the LEFT PIVOT ARM
(5) as shown in FIGURE 10.
48
25
27
28
2
47
33
23
3/8 X 1-1/4"
FIGURE 11
STEP 11:
• SECURELY assemble the PILLOW BLOCKS (33) on the LEFT PIVOT ARM (5) to the CROSS SUPPORT (6) and the PIVOT ARM
SUPPORT (2) using four 3/8 X 1-1/4" BUTTON HEAD CAP SCREWS (23), four 3/8" SAE WASHERS (27), four RH WASHERS (28),
four STARLOCK WASHERS (47), four 3/8" LOW HEIGHT LOCK NUTS (25) and four RH CAPS (48) as shown in FIGURE 11.
4
23
3/8 X 1-1/4"
6
FIGURE 10
5
5
11
33
6
Advertisement
Table of Contents
