LifeFitness CLUB SERIES Assembly Instructions Manual

LifeFitness CLUB SERIES Assembly Instructions Manual

Flat bench
Hide thumbs Also See for CLUB SERIES:

Advertisement

CLUB SERIES FLAT BENCH
End of Life

ASSEMBLY INSTRUCTIONS

Part # 7149101
1
Revision: 6/20/01
Rev A.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CLUB SERIES and is the answer not in the manual?

Questions and answers

Summary of Contents for LifeFitness CLUB SERIES

  • Page 1: Assembly Instructions

    CLUB SERIES FLAT BENCH End of Life ASSEMBLY INSTRUCTIONS Part # 7149101 Revision: 6/20/01 Rev A.
  • Page 2: Parts List

    PARTS LIST PART # DESCRIPTION PART # DESCRIPTION 71387 BENCH FRAME 3102905 3/8 X 3-3/4” BOLT 71389 3 X 2 X 16” TUBE 3202406 3/8 X 1-1/4” BUTTON HEAD BOLT 71392 REAR UPRIGHT 3102807 3/8” LOW HEIGHT LOCK NUT 71391 SUPPORT BRACKET 3102514 3/8”...
  • Page 3 7 3/8 X 2-3/4” BOLT 3/8” LOW HEIGHT LOCK 8 3/8 X 3-3/4” BOLT 9 3/8 X 1-1/4” BUTTON HEAD BOLT 3/8” SAE WASHER WASHER RH CAP 3/8” BLACK SAE (BLACK/WHITE/PLATINUM) WASHER...
  • Page 4 FIGURE 1 3/8 X 2-3/4” 3/8 X 3-3/4” STEP 1: • SECURELY assemble the 3 X 2 X 16” TUBE (2) to the BENCH FRAME (1) using four RH CAPS (14), two 3/8 X 3-3/4” BOLTS (8), four 3/8” RH WASHERS (13) and two 3/8” LOW HEIGHT LOCK NUTS (10) as shown in FIGURE 1. •...
  • Page 5 FIGURE 2 3/8 X 2-3/4” STEP 2: • SECURELY assemble the BACK PAD (6) to the BENCH FRAME (1) using two RH CAPS (14), two 3/8 X 2-3/4” BOLTS (7) and two 3/8” RH WASHERS (13) as shown in FIGURE 2. BLACK 3/8 X 1-1/4”...
  • Page 6: Warranty Information

    • Upholstery with mild soap and water. • Guide rods with a cotton cloth. • Hand grips with mild soap and water. • Frame damage can be repaired with touch-up paint can be purchased from your LifeFitness customer service representative at (800)351-3737. Inspect: •...

Table of Contents