Adding Pci Cards - Supero SUPERSERVER 6017R-TDLF User Manual

Processor & Memory Module Population Confi guration
For memory to work properly, follow the tables below for memory installation.
Processors and their Corresponding Memory Modules
CPU#
CPU1
CPU2
Number of
CPUs+DIMMs
1 CPU & CPU1
2 DIMMs P1-DIMMA1/P1-DIMMB1
1 CPU & CPU1
4 DIMMs P1-DIMMA1/P1-DIMMB1, P1-DIMMC1/P1-DIMMD1
2 CPUs & CPU1 + CPU2
2 DIMMs P1-DIMMA1, P2-DIMME1
2 CPUs & CPU1 + CPU2
4 DIMMs P1-DIMMA1/P1-DIMMB1, P2-DIMME1/P2-DIMMF1
2 CPUs & CPU1 + CPU2
6 DIMMs P1-DIMMA1/P1-DIMMB1/P1-DIMMC1, P2-DIMME1/P2-DIMMF1/P2-DIMMG1
2 CPUs & CPU1 + CPU2
8 DIMMs P1-DIMMA1/P1-DIMMB1/P1-DIMMC1/P1-DIMMD1, P2-DIMME1/P2-DIMMF1/P2-
DIMMG1/P2-DIMMH1
5-6

Adding PCI Cards

PCI Expansion Slots
One RSC-RR1U-E16 riser card is used to support a standard size expansion (add-
on) card to the system.
PCI Card Installation
Before installing a PCI add-on card, make sure it is supported by the riser card.
Begin by releasing the locking tab that corresponds to the slot you wish to populate.
Insert the expansion card into the riser card by pushing down with your thumbs
evenly on both sides of the card.
PCI Slot/Card Confi gurations
Riser Card
RSC-RR1U-E16 (optional part)
Corresponding DIMM Modules
P1-DIMMA1 P1-DIMMB1
P2-DIMME1 P2-DIMMF1
Processor and Memory Module Population
CPU and Memory Population Confi guration Table
(*For memory to work proper, please install DIMMs in pairs)
Chapter 5: Advanced Serverboard Setup
P1-DIMMC1
P2-DIMMG1
Expansion card supported
1x PCI-E 3.0 x16 card
5-9
P1-DIMMD1
P2-DIMMH1