Supero SUPERSERVER 6017R-TDLF User Manual page 62

S S
UPER ERVER 6017R-TDLF User's Manual
Fan Headers
This motherboard has eight system/CPU
fan headers (Fan 1-Fan 4) on the moth-
erboard. All these 4-pin fans headers are
backward compatible with the traditional
3-pin fans. However, fan speed control
is available for 4-pin fans only. The fan
speeds are controlled via IPMI Interface.
See the table on the right for pin defi ni-
tions.
Internal Speaker
The Internal Speaker, located at SP1, can
be used to provide audible indications for
various beep codes. See the table on the
right for pin defi nitions.
Power LED/Speaker
On JD1 header, pins 1-3 are used for
power LED indication, and pins 4-7 are
for the speaker. See the tables on the
right for pin defi nitions. Please note that
the speaker connector pins (4-7) are used
with an external speaker. If you wish to
use the onboard speaker, you should
close pins 6-7 with a jumper.
Pin Defi nitions
Pin#
1
2
3
4
Internal Buzzer (SP1)
Pin Defi nition
Pin#
Pin 1 Pos. (+)
Pin 2 Neg. (-)
PWR LED Connector
Pin Defi nitions
Pin Setting
Pin 1
Pin2
Pin3
Speaker Connector
Pin Setting
Pins 4-7
Pins 6-7
5-16
Fan Header
Defi nition
Ground
+12V
Tachometer
PWR Modulation
Defi nitions
Beep In
Alarm
Speaker
Defi nition
Anode (+)
Cathode (-)
NA
Pin Settings
Defi nition
External Speaker
Internal Speaker