Adding Pci Add-On Cards - Supero SUPERSERVER 7047R-TXRF User Manual

5-6

Adding PCI Add-On Cards

The SuperServer 7047R-TXRF server can support four PCI-E Gen. 3.0 x8
expansion cards and one PCI-E Gen. 2.0 x4 (in x8) expansion card.
Installing an Add-on Card
1. Locate the release tab on the top of the PCI slot bracket.
2. Gently apply pressure in the middle of the release tab to unlock the PCI slot
bracket.
3. Pull the release tab upward.
4. Remove the screw holding the bracket in place and pull the bracket from the
chassis.
Figure 5-7: Add-on Card/Expansion Card Port
Press the Middle
of the Release Tab
Chapter 5: Advanced Serverboard Setup
Lift the
Release Tab
5-11