Control Panel Leds; Information Led; Nic1; Nic2 - Supero SUPERSERVER 6017R-TDLF User Manual

S S
UPER ERVER 6017R-TDLF User's Manual
3-3

Control Panel LEDs

The control panel located on the front of the SC813LT-350CB chassis has fi ve
LEDs. These LEDs provide you with critical information related to different parts of
the system. This section explains what each LED indicates when illuminated and
any corrective action you may need to take.

Information LED

This LED will be solid blue when the UID function has been activated. When this
LED fl ashes red, it indicates a fan failure. When red continuously it indicates an
overheat condition, which may be caused by cables obstructing the airfl ow in the
system or the ambient room temperature being too warm. Check the routing of
the cables and make sure all fans are present and operating normally. You should
also check to make sure that the chassis covers are installed. Finally, verify that
the heatsinks are installed properly (see Chapter 5). This LED will remain fl ashing
or on as long as the indicated condition exists.
1

NIC1

Indicates network activity on LAN1 when fl ashing.
2

NIC2

Indicates network activity on LAN2 when fl ashing.

HDD

Channel activity for all HDDs. This light indicates hard drive activity on the 6017R-
TDLF when fl ashing.
3-2