Table of Contents
Advertisement
S
S
UPER
ERVER 6017R-TDLF User's Manual
Power Button
The Power Button connection is located
on pins 1 and 2 of JF1. Momentarily
contacting both pins will power on/off the
system. This button can also be confi g-
ured to function as a suspend button (with
a setting in the BIOS - See Chapter 5).
To turn off the power when the system is
in suspend mode, press the button for 4
seconds or longer. Refer to the table on
the right for pin defi nitions.
Serial Port
One COM port (COM1) is located on
the Backplane I/O panel on the mother-
board. See the table on the right for pin
defi nitions.
Universal Serial Bus (USB)
Four Universal Serial Bus ports (USB
0/1, USB 2/3) are located on the I/O back
panel. (Cables are not included). See the
tables on the right for pin defi nitions.
Pin Defi nitions (JF1)
Pin#
1
2
Serial COM) Port
Pin Defi nitions
Pin #
Defi nition
1
DCD
2
RXD
3
TXD
4
DTR
5
Ground
Pin Defi nitions
Pin# Defi nition
1
2
3
4
5
5-14
Power Button
Defi nition
Signal
Ground
Pin #
Defi nition
6
DSR
7
RTS
8
CTS
9
RI
10
N/A
Backplane
USB (0/1, 2/3)
+5V
PO-
PO+
Ground
NA
Advertisement
Table of Contents
