Table of Contents
Advertisement
Installing the Chassis into a Rack
1. Line chassis rails (A) with the front of the rack rails (B).
2. Slide the chassis rails into the rack rails, keeping the pressure even on both
sides (you may have to depress the locking tabs when inserting). When the
server has been pushed completely into the rack, you should hear the locking
tabs "click" into the locked position.
3. (Optional) Insert and tighten the thumbscrews that hold the front of the server
to the rack.
Warning: do not pick up the server with the front handles. They are de-
signed to pull the system from a rack only.
Stability hazard. The rack stabilizing mechanism must be in place, or the
rack must be bolted to the fl oor before you slide the unit out for servicing.
Failure to stabilize the rack can cause the rack to tip over.
1
B
1
A
Figure 2-4. Installing the Rack Rails
2-7
Chapter 2: Server Installation
Advertisement
Table of Contents
