(1) work lamp glass case
1. turn the key switch to the "off"
position and unscrew the screw
TF120(RX6030,7030,8030)-AU-07.in43 43
from the mounting hole with a
cross-head screwdriver to sepa-
rate the front glass case.
(1) work lamp bulb
2. unscrew the ground wire screw,
disconnect the connector, and
T11O755A
turn the bulb counterclockwise to
remove it. then, install a new bulb
with the same capacity.
CABIN LAMP
(1) cabin lamp bulb
1. fit a flat-bladed screwdriver into
T11O756A
the edge of the cabin lamp and pry
off the room lamp cover.
2. remove the cabin lamp bulb by
pulling it up. install a new bulb.
7
-
maintenance
H11O666A
7
2016-06-17 오후 1:55:54