Kioti RX6030 Manual page 224

7
2 rx6030 / rx7030 / rx8030
-
(1) cap (2) connector
2. remove the cap.
3. press and turn the socket coun-
terclockwise to remove the bulb. if
the bulb is blown, replace it with a
new bulb with the same capacity.
TF120(RX6030,7030,8030)-AU-07.in42 42
WARNINg
•
If using a bulb other than the
specified one, the lamp can be
damaged and the tractor can
even catch fire.
•
Make sure to use bulbs with
the specified capacity.
CAUTION
M55O799A
•
Make sure to use a kIOTI genu-
ine bulb. Using a non-recom-
mended bulb can cause a fire.
•
The headlamps can temporar-
ily be fogged due to rain or
car wash. This is because of
the temperature difference be-
tween the inside and outside
of the lamp, which is normal.
wORK LAMP (FRT/RR)
the work lamp uses a halogen bulb.
Do not touch the illuminating part of
the halogen bulb.
the bulb life can be shortened by
finger prints, dust and moisture, or
the bulb even can be broken. clean
it with soft cloth.
be careful of the following when re-
placing the halogen bulb:
replace the bulb after it is cooled

down.
Do not touch the glass of the bulb.

handle the bulb with care and be

careful not to scratch or rub it.
Do not let the bulb contact with liq-

uid when it is illuminated.
wear protective glasses when re-

placing the bulb.
2016-06-17 오후 1:55:54