Coolant (Ai) - Kioti RX6030 Manual

7
 rx6030 / rx7030 / rx8030
-
(1) reservoir tank
(a) full (b) low
6. add coolant to the reservoir tank
to the "full" level.
7. start and operate the engine for
few minutes.
8. stop engine and let cool.
9. check coolant level of reservoir
tank and radiator. add coolant if
necessary.
Coolant capacity
9.5 l (2.51 u.s. gal.)
TF120(RX6030,7030,8030)-AU-07.in34 34
CAUTION
To avoid accidents:
•
Do not remove the radiator
cap while the coolant is hot.
yo u c a n b e b u r n e d b y h o t
steam. Make sure to remove
it after the coolant is cooled
down enough.
•
Even though the coolant is
TF1O705A cooled down, turn the cap to
its first stop and then wait un-
til it is depressurized before
removing the cap completely.
IMPORTANT
•
Do not start engine without
coolant.
•
Use clean, fresh water and
anti-freeze to fill the radiator
and reservoir tank.
•
when the anti-freeze is mixed
with water, the anti-freeze mix-
ing ratio must be no less than
50% mixture of water and anti-
freeze.
•
Securely tighten radiator cap.
•
If the cap is loose or improp-
erly fitted, water may leak out
and the engine could overheat.
•
If the radiator cap has to be
removed, follow the caution
above and securely retighten
the cap.
•
If the coolant leaks, contact
your local kIOTI Dealer.
2016-06-17 오후 1:55:49