Pto Shift Lever; Pto Shift Lever - Kioti RX6030 Manual

▶ hOw TO uSE ThE ShuTTlE ShIFT
lEvER
to select the driving direction, if

the shuttle shift lever is pushed for-
ward with lifting slightly, the tractor
is driving forward, and if the shuttle
shift lever is pulled backward with
lifting slightly, the tractor is driving
reverse.
a t i n i t i a l s t a r t i n g , c o n t r o l t h e

shuttle lever with the engine rpm
decreased. when the tractor has
s t a r t e d t o m o v e , d e p r e s s t h e
foot throttle pedal to increase the
speed.
if the transmission temperature is

low, there may be starting-shock
during shifting. make sure to warm
up the engine before driving the
tractor.
even at the high speed you can

shift the shuttle lever without de-
pressing clutch pedal. if the shuttle
shift lever is pulled back during
forward driving, the tractor is de-
TF120(RX6030,7030,8030)-AU-04.in39 39
celerated under 5.6 m/h (9 Km/h)
and then the driving direction is
changed to reverse.
if the shuttle shift lever is placed in

the neutral position from forward or
reverse, the tractor is decelerated
slowly due to the lose of powers.
CAuTION
•
Reduce speed before moving
this lever since it is very dan-
gerous to switch the driving
direction at a high speed.
description oF operating system

PTO ShIFT lEvER

(1) pto shift lever

(a) 1st (b) 2nd
this lever is used to shift to one of
the 2 pto speeds as follow:
Shift 1st
pto rpm 540
when you work in light load, use 2nd
pto stage.
For high load work, select the 1st
gear (540) position and set the en-
gine speed to 2500 rpm to obtain
540 rpm of the pto speed.
4
3
-
4
Tf1O435A
(rpm)
2nd
540e
2016-06-17 오후 1:54:28