Cisco GS7000 Installation And Configuration Manual page 65

HMS MIB Specifications
heOpAmpLaserTable
The heOpAmpLaserTable has read-only access. Various elements are explained
below.
This instance represents the slot number in which the EDFA is installed as well as
the heOpAmpLaserIndex.
OID 1.3.6.1.4.1.5591.1.11.1.3.1.1.3.1.1
heOpAmpLaserTemp - The value of this OID gives the temperature of the amplifier
laser in 0.1 degrees Celsius.
OID 1.3.6.1.4.1.5591.1.11.1.3.1.1.3.1.2
heOpAmpLaserBiasCurrent - The value of this OID represents the amplifier laser
bias current in 1.0 mA units.
OID 1.3.6.1.4.1.5591.1.11.1.3.1.1.3.1.3
heOpAmpLaserOutputPower - The value of the laser output power, in 0.1 dBm
units, displays in this OID. This element contains the same value as
heOpAmpOutputPower for the same EDFA on the heOPAmpOutputTable.
OID 1.3.6.1.4.1.5591.1.11.1.3.1.1.3.1.4
heOpAmpLaserTECCurrent - The value of this OID gives the laser thermo electric
cooler current in 1.0 mA units.
OID 1.3.6.1.4.1.5591.1.11.1.3.1.1.3.1.5
heOpAmpLaserType - This OID gives a description of the installed EDFA. The
various descriptions are listed below.
heOpAmpLaserType entries for the EDFA
Broadcast 17.0 dBm
Broadcast 20.0 dBm
Broadcast 22.0 dBm
GF17.0dBm Low gain
GF21.0dBm Low gain
GF17.0dBm High gain
GF21.0dBm High gain
OID 1.3.6.1.4.1.5591.1.11.1.3.1.1.3.1.6
heOpAmpOutputTable
The elements of heOPAmpOutputTable, used for controlling output power and
constant gain, are explained below.
OL-29937-01 51