Cisco GS7000 Installation And Configuration Manual page 63

HMS MIB Specifications
dlActiveImageVersion - This value contains the active image version number, such
as "OHN_3.00.03" for the transponder core module.
OID 1.3.6.1.4.1.5591.1.8.2.1.1.4
dlActiveImageDescription - The description of the module is the value for this OID,
such as "SM/LCM" for the local control module.
OID 1.3.6.1.4.1.5591.1.8.2.1.1.5
dlActiveImageAccess - Access to the active image is always
"overwriteNotAllowed(2)."
OID 1.3.6.1.4.1.5591.1.8.2.1.1.6
dlStartupImage - This OID has read-write access. Therefore, the value can be set to
indicate which value should be active following a download, 1 or 2.
OID 1.3.6.1.4.1.5591.1.8.2.1.1.7
dlDownloadOption - This OID has read-write access. Therefore, the value of
dlDownloadOption can be set to setStartupAndReset(1) or noAction(2).
OID 1.3.6.1.4.1.5591.1.8.2.1.1.9
dlDownloadTimeout - This OID has read-write access. The value of this OID can be
set to increase the time needed before the download times out. Valid values are 60 to
300 seconds. However, the transponder core module does not have a Real Time
Clock so the time may vary when compared to actual seconds.
OID 1.3.6.1.4.1.5591.1.8.2.1.1.10
dlImageTable - This OID has read-only access. It is useful for getting data regarding
the inactive image on a module.
dlImageStatus - This OID reports the validity of an image with validApplication(2)
or invalid(1). An image may be invalid if the module in that slot does not run
software, only one image is present, the slot is empty, or the image is corrupt.
OID 1.3.6.1.4.1.5591.1.8.2.2.1.3
dlImageAccess - This OID reports imageAccessReadWrite(1) if the inactive image
and a new image may be downloaded to it. The active image is indicated by
imageAccessReadOnly(2). This value also applies if the module does not run an
image.
OID 1.3.6.1.4.1.5591.1.8.2.2.1.4
OL-29937-01 49