Cisco GS7000 Installation And Configuration Manual page 37

6 Follow the remaining screen prompts to complete the installation.
Result: When complete, the following screen displays.
7 Click Close.
Result: ViewPort is installed in the chosen directory, a USB driver file is added to
the system, and a ViewPort icon is added to your desktop.
8 Double-click the ViewPort icon on your desktop to run the program.
Configuring the LCM with ViewPort
Perform the following steps to configure the LCM using ViewPort.
1 Make sure the latest ViewPort software is installed on your desktop or laptop
computer.
2 Connect a USB port on the computer to the LCI USB connector on the LCM as
shown in the following illustration.
OL-29937-01
Local Control Module Configuration Procedure
23