Error State - Cisco GS7000 Installation And Configuration Manual

Hub/node status monitor/local control module

Hide thumbs Also See for GS7000:

Table of Contents

Error State

If the SM is in the "Error" state, then the transponder core module in the SM is

defective. Replace the transponder core module or the entire SM as necessary.

WARNING:

Be sure that the LCM software and transponder core module software match.

Software versions prior to 3.00.03 are not compatible with software versions

3.00.03 and above.

OL-29937-01

Status Monitor Troubleshooting

Table of Contents